Step 1

1 - Print the background sky on glossy photo paper in  high resolution.
2 - Drill the center hole according to rivet or fastener used.
3 - Cut out unnecessary parts.

You can click on the picture to enlarge (zoom).

Step 2

1 - Print the declination rule and hourly disc on transparency film in high resolution.
2 - Drill the center hole according to rivet or fastener used.
3 - Cut the rule of declination at your convenience (see below).
4 - Positioning on the sky background.

You can click on the picture to enlarge (zoom).



 

Step 3

1 - Cut the hourly disc.
2 - Drill the center hole according to rivet or fastener used.
3 - Postion and center the hourly disc on the sky bacground over the declination rule.

You can click on the picture to enlarge (zoom).
 

Step 4

1 - Assemble the starfinder with a rivet or fastener.

You can click on the picture to enlarge (zoom).
 

Your starfinder is mounted... Turn this.

You have several options to dress up the back of the starfinder. View pictures on the left to the bottom of the page. Print the model chosen on glossy photo paper at high resolution. Cut and glue carefully on the back of the starfinder.

1 - Messier Black and White (Night use). Download

2 - Messier Color (Day use). Download

3 - Caldwell Black and White (Night use). Download

4 - Caldwell Color (Day use). Download

5 - Special Goto (For the location of stars requested by the racket during the initialization of the mount) Download

BACK THE MENU

FOLLOWING --->